RGC Hydraulic Core Drill
Additional RGC Products
More STUFF from YCP
 
   
 


****************  Site is Being Worked On Currently *********************
Check our Corporate Site for Additional Information
www.ycpcorp.com  or email us at ebiz@ycpcorp.com  if you need additional information or a quotation.  We appreciate the Opportunity to assist you. 888-591-4991
 

HYDRACORE DRILLS
The RGC Hydra Core Drill is the most efficient and precise tool for boring holes of 6" (15.2 cm) to 22" (55.9 cm) through concrete floors, ceilings, or walls.
The drill stand is secured to the surface with lag bolts which permits clean, precise hole boring while increasing operator comfort. The hydraulic power operation delivers consistent, efficient power with less noise and vibration.

 
FEATURES OF HYDRACORE DRILLS

 Standard unit includes stand, hydraulic motor, carriage, 42" (106.7 cm) square mast, pillow block with garden hose water intake, and hydraulic hose whips.
 
 Heavy duty roller bearings and hydraulic motor.
 
 Hydraulically powered by an RGC HydraPak or compatible power source.

 Variable speed control.

 Non-reversing motor to protect spindle thread.

 Wheels for easy mobility.


Why Hydraulics ?   Lets review some information about the "Hydraulic Solution", Benefits of Hydraulic Equipment.
 
vs. Pneumatic (Air Powered) Tools
 
* No exhaust air creating noise, dust, and breathing problems. 
* Less wear and longer life as all parts continuously move in oil. 
  Will not freeze in cold weather. 
* Much higher performance to weight ratio (i.e. a 72 lb. hydraulic breaker will outperform a 90 lb. pneumatic breaker). 
* Far more portable than pneumatic (transportable by pick-up truck). 
* Versatility to be powered off other hydraulic sources (such as a Skidsteer or Bobcat).  * Lower initial cost and less fuel consumption.
 
vs. Electric Powered Tools

 
* No danger of high voltage injuries and can be used underwater. 
* Longer life and less maintenance. 
* Tools like the Hand Held Core Drill have built-in pressure relief if the bit binds in the cut - resulting in greater operator safety.
 
vs. Gas Powered Tools
 
* No danger of hot and poisonous exhaust. 
* Far less maintenance - as the power source is removed from the work area. 
* Less noise and weight - no engine on the tool.
 
General Comparisons
 
* High power-to-weight ratio - the highest of all available power sources. 
* Greater operator comfort + less fatigue = greater productivity.
* Lowest maintenance time and longer life of the components. 
* Less noise - no engine on the tool. Perfect for sound-sensitive jobs. 
* Hydraulic tools can be used underwater! 
* Will operate in sub-zero conditions when other tools freeze up. 
* One power source can run many different hydraulic tools. 
* Extremely portable power unit - small and easy to maneuver. 
* Versatility to run off other hydraulic power take offs (PTOs). 
* Operate indoors - no exhaust fumes from the tool. 
* Easy to cut wet - hydraulic tools are a closed system that cannot be contaminated by water, dust, or debris. 
 
There are a variety of factors that have contributed to the increasing popularity of handheld hydraulic tools.


Power to weight ratio
Handheld hydraulics offer hands down the best power to weight ratio of the four traditional power sources. For example, a top-of-the line 60-pound class hydraulic handheld breaker can outperform a 90-pound class pneumatic breaker. And if you factor in the power sources, the advantage to hydraulics is even more dramatic. A 185 cfm air compressor may weigh as much as 2,700 pounds, while a typical hydraulic power pack comes in at just 150 pounds.

Transport and storage
In the old days, a yard full of big equipment might make an equipment owner feel proud, but today it is seen as more of a liability in terms of storage and handling. Handheld hydraulic equipment is small and light by comparison, making little demand on large storage facilities or heavy transport and handling equipment to get it out to job sites. No heavy truck is needed.

Investment
With asset management taking on ever-increasing importance in the rental business and elsewhere, a hydraulic package (power pack and breaker) has a decided cost advantage over a compressor and a pneumatic breaker. It is important to note that an air compressor has many other uses besides powering a breaker and that a standard 185 cfm model can supply air for two or even three breakers at a time. Still, a hydraulic power pack can run other hydraulic tools and offers an excellent low-cost opportunity to be competitive for the small contractor or for rental operations at less than half the cost of an air compressor and breaker combination.

Moreover, with the proper fittings, a hydraulic breaker can be hooked up directly to a hydraulic carrier, such as a mini-excavator, skidsteer loader or backhoe. Provided the hydraulic flows match — a flow-regulating device can be installed — the breaker will work quite well, thus saving the additional cost of a separate power pack.

Ease of use
On site, handheld hydraulic breakers and pneumatic breakers are used in much the same way. Modern hydraulic hoses are light and quite flexible, approaching the characteristics of standard rubber air hoses. Extending hoses is simple with the state-of-the-art couplings used on hydraulic equipment today. One manufacturer claims that you can connect up to 70 feet of hose with no significant drop in performance.

In the old days, dropping the end of a hydraulic hose on the ground could spell disaster, as the dirt could easily contaminate the hydraulic oil circuit. Today's no-spill flat face hydraulic couplings are designed to keep the dirt out, and filter systems prevent most of the danger of contamination. There's a hydraulic power pack that uses a biodegradable hydraulic oil, so that inadvertent spills need not cause undue worry.

Handheld hydraulic breakers are easy to handle around the jobsite. Most have a slim design, and several models are available with ergonomic anti-vibration handles. Service requirements for hydraulic systems are generally modest. With modern, reliable four-stroke gasoline engines providing the power, operating the hydraulic power pack is simple, and fuel is readily available. Most hydraulic power packs come with wheels and handles so they can be readily maneuvered around the job site.

Hydraulic vs. electric equipment
Electric demolition hammers and breakers are arguably even easier to use and less costly than handheld hydraulics, but the comparison falls short when power to weight ratios are considered. A 65-pound hydraulic breaker can compete comfortably with a 90-pound air hammer in hitting power. Handheld hydraulics are also more robust and less subject to expensive repairs.

Handheld hydraulic demolition tools are a growing part of the world market. They are used in a variety of applications, beginning with light demolition and repair work on structures, infrastructure service and repair such as roadwork, trenching and other similar uses. More specialized applications such as tie tamping on railroads or cleaning out kilns at cement works are also common.

A hydraulic handheld breaker can be put to use virtually anywhere you might use a pneumatic, electric or gasoline-powered breaker. Of course, there is never a single best choice for all cases. Nevertheless, handheld hydraulic breakers have developed over the past 20 years from a rather crude technology into sophisticated tools for a broad variety of construction and maintenance applications, earning their rightful place in the rental fleet.


YCP, a different kind of Sales Company. We give you our best price the 1st time.  We also pass on freight & Bulk Purchasing Discounts if available.

Banks charge to Process Credit Cards. ( We give our Customers an additional [3%] discount when they pay with a Wire Transfer )  Discover the YCP Difference

 

EMAIL
ebiz@ycpcorp.com  

CORPORATE SITE
www.ycpcorp.com  

 

CCR Registered
Veteran Owned
Small Business

 

$ave 3 %
Extra When
PAYING with
WIRE Transfer


MORE PRODUCTS FROM YCP - COME VISIT US  www.ycpcorp.com   , See what
YCP has to help you get the Job Done .....   Below is a Partial Line Sheet

* CONCRETE HANDLING EQUIPMENT from GARBRO
   Concrete Buckets
   Concrete Carts - Manual "Georgia Buggy"
   Bin Gates
   Rock Hoppers
   Roofers Bucket
   Floor Hoppers
   Skidsteer Concrete Buckets
   Pre-Casters Bucket
   Barrel Loading Hopper
   Industrial - Foundry Wheelbarows

 

* CONCRETE VIBRATORS

   Electric  1.5 & 2.5 HP
   Gas Powered
   Pneumatic Concrete vibrators
   Concrete Vibrator Specialty Heads

 

* DIAMOND BLADES & CORE BITS
   Asphalt Diamond Blades
   Brick & Block Diamond Blades
   Concrete Diamond Blades
   Core Drill Attachments
   Core Drill Stands
   Diamond Core Bits
   Diamond Cup Wheels
   Dual Purpose Diamond Blades
   Ductile Iron Diamond Blades
   Fire & Rescue Diamond Blades
   Hand Held Concrete Saws
   Hand Held Core Drills
   Pro Series - Diamond Blades & Core Bits (When ONLY the Best Will Do)
   Specialty Diamond Blades
   Walk Behind Saws
  
   

* EQUIPMENT ATTACHMENTS
   Crescent Pipe Tongs
   CTI Asphalt Cutters
   CTI Forks
   Felco Backfill Conveyor
   Felco Bedding Box
   Felco Bedding Conveyors
   Felco Compaction Wheels Buckets
   Felco Compaction Wheels
   Felco Towed Dump Truck Conveyor
   Felco Vibratory Plate Buckets  
   Kenco Barrier Lift
   Kenco Compaction Wheel
   Kenco Multi Lift
   Kenco Mechanical Grapple
   Kenco Panel Clamp
   Kenco Pipe Hook
   Kenco Pipe Lift
   Kenco RigMax
   Kenco Slab Crab
   Kenco Slab Lift
   Kenco Super Lift   


* FIRE & RESCUE EQUIPMENT
   Diamond Rescue Blades
   Firehose Testers
   Hurco - Visability Smoke Training Equipment
   Rescue Shoring Equipment
   Rescue Ventilation
  


* HYDRAULIC CONSTRUCTION TOOLS
   PoweRam - Hydraulic Large Power Units
   Rice - Hydraulic Power Units
   RGC - Hydraulic Breakers
   RGC - Hydraulic Chain Saws
   RGC - Hydraulic Concrete Saws
   RGC - Hydraulic Core Drill
   RGC - Hydraulic Grinders
   RGC - Hydraulic Ground Rod Driver
   RGC - Hydraulic Impact Wrenchs
   RGC - Hydraulic Post Pounders
   RGC - Hydraulic Post Pullers
   RGC - Hydraulic Power Units
   RGC - Hydraulic Rock Drill & Rotary Hammer
   RGC - Hydraulic Submersible Pumps
   RGC - Hydraulic Tree Trimming Tools
   RGC - Hydraulic Walk Behind Saws
   RGC - Hydraulic Material Lift
   RGC - Hydraulic


* HYDRAULIC ROOFING EQUIPMENT
   RGC - Platform Hoist
   RGC - Pivoting Platform Hoist
   RGC - HandiHoist
   RGC - Platform Hoist Options
   RGC - Swing Hoist
   RGC - Hoisting HydraPaks
   RGC - Trolley Hoist
   RGC - Ground Mount Hoist
   RGC - Roof Bracket & Shingler


* HYDROSTATIC TESTING EQUIPMENT
   Cherne - Gas Powered Hydrostatic Test Pumps
   Hurco - Gas Powered Hydrostatic Test Pumps
   Rice - Diaphragm Pump
   Rice - Electric Hydrostatic Test Pumps
   Rice - Fire Hose Testers
   Rice - Piston/Roller Hydrostatic Test Pumps
   Rice - Plunger Hydrostatic Pumps
   Rice - Pneumatic Hydrostatic Test Pumps
  

* PIPE PLUGS & TESTING EQUIPMENT
   Custom Pipe Plugs
   Disk Plugs
   High Flow Pipe Plugs
   High Pressure Pipe Plugs
   Leak Locating Equipment
   Line Acceptance Equipment
   Line Stringing Equipment
   Mandrels for Pipe Testing
   Manhole Vacuum Testing Equipment
   Mechanical Pipe Plugs
   Pillow Plugs
   Pipe Joint Testers
   Pipe Plug Accessories
   Pneumatic Pipe Plugs
   Specialty Pipe Plugs
 


* PIPE - BURSTING/PULLING/PUSHING EQUIPMENT

* TRENCH SAFETY EQUIPMENT

   Aluminum Shoring
   Aluminum Trench Shields
   Bedding Box - Stone Mizers
   Custom Barge Boxes
   Modular Aluminum Shields
   Steel Manhole Shields
   Steel Trench Shields


* VARIOUS SPECIALITY ITEMS
   Hurco Power Smoker II - Liquid Smoke Testing
   Portable Post Hole Diggers
   Snow Plow Blades
   Titan Pipe Tugger
   Tow Behind Post Hole Diggers
   Vacuum Excavation Equipment
   Vacuum Tanks - Large
   Water Tanks - Large